electric stud finder

13 Essential tools for any project

Home improvement

Here is a list of the basics that should be in any home toolbox, including electric stud finder. These tools should not cost you more than $ 250. And if you buy a set of good quality (many home stores sell hand tools with a lifetime warranty).

  1. Hammer

Hammer with wooden handles are good, but a fiberglass handle will help soften the blow from nails. look for “forged” on the hammerhead. (Forging is a more expensive manufacturing process for steel tools, but a tool that undergoes forging rather than casting will be more durable and more extended.)

  1. Stud Finder

You can get a meter for about $ 10, but then you have to figure out how to use it. A good alternative is a tester with probes and a light that turns on when there is current. Use it before working on any electrical circuit to make sure there is no current.

  1. Screwdrivers

You can start with a single screwdriver with interchangeable bits that will do for most housework. However, if you intend to work on larger projects, you will probably want to purchase a set of screwdrivers. Inclusive kits that contain an assortment of heads (slotted, cruciform, and square) are easily accessible.

  1. Level

A small 9-inch level of a torpedo (named because of its curved ends) will allow you to make sure that everything you raise is straight and, of course, the level.

  1. Pliers

Often available in sets of three, which include a needle nose, wire cutting, and slight glide. Needle spouts are incredibly useful for penetrating narrow spaces and for performing any electrical work. wire cutters will not only cut but also double the wire stripper,

  1. Clamping pliers

Often called a vise, the jaws are adjustable and fixed on anything necessary to maintain stability. It can also be beneficial in urging hard bolts to turn. You can often use locking pliers in place of an adjustable (sickle) wrench and minimize your investment in tools.

  1. Universal knife

With retractable and interchangeable blades, it is safer to use than a regular knife (since you can remove the edge when not in use), and interchangeable blades mean that it is always sharp. Excellent for cutting floors, plastic, or just for sharpening a pencil.

  1. Drill

A 3’8″ reversible drill is necessary for any toolbox. They are not only suitable for drilling holes, but can also be used as a screwdriver. They are universal and often easier to find at the workplace. Do not also forget to purchase a set of drills of various sizes.

  1. Hand saw

A small (12 to 15 inches) hand saws quickly cut wood and is an excellent choice for people who are concerned about the safety of a powerful circular saw.

  1. Chalk line

It helps when cutting large sheets of plywood or laying floors.

  1. Clove finder

If you are hanging shelves, you must install them on the cloves.

  1. Random orbital sander

If you intend to complete (or refit) a woodworking project, you will need to invest in a sander.

  1. Circular saw

If you intend to take on the project of a building of any size, you will find that a circular saw is practically necessary.